Immersion Heaters


Circulation_heater_and_ControlsIndustrial immersion heaters are a fast and efficient way of heating up liquid solutions inprocessing equipment, large tanks and containers in many industries.

Circulation Heaters

Circulation heaters are a type of immersion heater which is composedSkid_Mounted_Circulation_Heater_2
of a flanged heater housed in a steel, carbon steel, stainless steel, Incoloy®, Inconel®, or titanium vessel.


Inline Heaters

Inline heaters areSKID_MOUNTED_HEATER_WITH_CONTROL_PANEL suitable for applications which require
intermediate heating where the process fluid must maintain a flow rate.

Flanged Heaters

Flanged heaters are mounted on the sides of tanks to provideSTANDOFF_FLANGE
direct heating for liquids. They are a popular heating option for oil sector applications. Flanged heaters are made of a variety of different alloys, including steel, stainless steel, copper, titanium, Incoloy®, and Inconel®, with a heavy wall sheath of 0.028” up to 0.065” thickness available in steel, stainless steel, Incoloy®, and Inconel®.


Screw Plug Heaters

Screw plug heaters are a form of immersion heater used to heat gases and liquid solutions in smaller tanks where control is also required.


Pipe Heater

Pipe heaters provide indirect heating to the liquid. Use pipe heaters in tank applications as water heating elements or for other substances requiring low watt densities, such as molasses, waxes, tar, and corrosive substances.


Over The Side Heaters

Over the side heaters are designed to be installed in the upper part of a tank. Using this approach, there is adequate space available in the tank for operations.


Boiler Heaters


Tubular Heaters


Strip Heaters


Finned Tubular Heating


Cartridge Heaters


Band Heaters


Silicone Rubber Heaters


Open Coil Elements


Duct Heaters


Infared Radiant Heaters


Control Panels